There 1974 participants randomly selected in the year of 2012. And this research will be funding myself because the project does not require a lot of resources and fund.

The purpose of this assignment is to find out what people think about suicide.

II. Sample

There 1974 participants randomly selected in the year of 2012. And this research will be funding myself because the project does not require a lot of resources and fund. The data was gathered by face to face and one by one interview and the data from respondents was recorded. And these participants were a representation of the general population of the people.

III. Variables

Categories: 1-male and 2- Female

Categories:

i) Yes

ii) No

iii) Don’t Know

iv) No answer

v) Not applicable

1-male and 2- Female

Level of Measurement: Nominal

1- Yes 2-No 3- Don’t know 4-No answer 5-not applicable

Level of Measurement: Nominal.

IV. Graphs and Charts

Run the appropriate graphs/charts for each of your variables listed above. Summarize your findings briefly in a paragraph or two. Be sure to include a title on each of your charts and other pertinent labels you feel are required.

1 Yes

2 No

3 Don’t Know

4 No answer

5 Not applicable

Series1 2012

Series2 2014

Yes

2 No

3 Don’t Know

4 No answer

5 Not applicable

From the chart above, it is clear that my respondents consisted of 2012 were 12% Yes, 52% No , 0.5% Don’t know 34% not applicable. Among all the respondents majority were undecided on whether people with uncurable diseases should have a right to commit suicide or not , this were closely followed by others who said yes and the minority were those who said no.

V. Frequency

Suicide4

Frequency

Percent

Valid Percent

Cumulative Percent

Yes

240

12.2

12.0

12

No

1016

51.5

52.0

64

Don’t Know

37

1.9

2.0

66

No answer

9

0.5

1.0

67

Not applicable

672

34.0

34.0

101.0

Total

1974

100.0

Cross tabulation Table

Hypothesis: Males and females differ on the issues related to suicide

Create a cross tabulation table with the variables that you have chosen. Be sure that you have all percentages that you need to properly present a detailed overview of your bivariate analysis.

Suicide4 * Gender Cross tabulation

Count

Gender

Total

Male

Female

Suicide1

Undecided

11

10

21

Yes

11

5

16

No

7

6

13

Total

29

21

50

Suicide4 * Gender Cross tabulation

Gender

Total

Male

Female

Suicide4

Undecided

52.4%

47.6%

100.0%

37.9%

47.6%

42.0%

Yes

68.8%

31.3%

100.0%

37.9%

23.8%

32.0%

No

53.8%

46.2%

100.0%

24.1%

28.6%

26.0%

Total

58.0%

42.0%

100.0%

100.0%

100.0%

100.0%

Compute the epsilon.

Accordingly to the table, high numbers of males and females are undecided on whether terminally ill patients should have a right to commit suicide or not. However, when it comes to those who chose yes or no, a greater proportion of females feel that terminally ill patients should not have a right to commit suicide. This opinion is different from the males since a greater portion of males believes that the terminally ill patients should have a right to commit suicide. My hypothesis is thus correct.

From the table, high quantities of male and females are undecided on whether terminally ill patients ought to have a privilege to submit suicide or not. In any case, with regards to the individuals who picked yes or no, greater proportion of females feel that terminally ill patients should not have a right to commit suicide This feeling is not quite the same as the guys since a more noteworthy segment of guys trusts that the in terminally condition patients ought to have a privilege to submit suicide. My hypothesis is in this way right.

Epsilon

Epsilon is calculated by subtracting the largest % and smallest %. Most statisticians believe that a percentage difference of above 9.0% shows strong relationship between the variables being cross tabulated. My hypothesis is thus correct and is accepted.

Conclusion: Males and females very on the issues related to committed suicide.

From the correlation there is no significant found that the variables are related with each other at 0.01 level

rule to determine if a potential relationship between two variables is worth examining further.

In week 3, we used epsilons and 10-percent-point rule to determine if a potential relationship between two variables is worth examining further.

This week, we’ll use tests of “measures of association” to figure out the exact strength of a relationship between two variables. In addition, we’ll learn how to interpret SPSS outputs for measures of association tests such as lambda, gamma, and Pearson’s r, along with other possible tests. Remember that these tests are specific to the level of measurement that your variables are. In other words, one test may not work in a different relationship test. Here are the guidelines:

  1. Both DV and IV are nominal variables: Lambda (when it is not a 2X2 table)

  2. If it is a 2X2 table: Phi

  3. Both DV and IV are ordinal variables: Gamma

  4. One variable ordinal AND the other variable dichotomous nominal (like Yes/No, male/female, etc.): Gamma

  5. One variable ordinal AND the other variable nominal (not dichotomous, has more than 2 categories): Cramer’s V.

  6. Both DV and IV are I/R variables: Pearson’s r

To interpret the output:

Keep in mind measures of association is a statistical procedure based on Proportional Reduction of Error (PRE). Thus the format of interpretation will be:

……knowing the IV will reduce error in predicting the DV by *%.

Please note: Don’t just say “IV” and “DV” in your explanation. You need to enter your variables names for IV and DV, and replace * for the exact test value from the output. If the value of Lambda is .34, then it will be interpreted as 34%.

Ok, now it is time for you to try! Be sure to test the strength of association of your final project for this week’s forum discussion. You can download the class handout attached at the bottom of the page, or Click here for details.

A comprehensive SWOT analysis should be performed relative to the Company’s ability to improve its competitive advantage.

Analyze publicly available information about a Fortune 500 Company and develop an assessment of the corporate strategy and its ability to increase competitive advantage.

Obtain and analyze information at the company, industry and market levels using various databases and reports. In addition to at least eight (8) professional or academic peer-reviewed articles.

The analysis should include an in-depth review of the Company’s most recent SEC Form-10k Annual Report and Form DEF-14A Proxy Statement. These SEC filings can be found at the SEC Edgar Database located at the URL http://www.sec.gov/edgar/searchedgar/companysearch.html . Pay particular attention to the Management Discussion and Analysis (MD&A) sections of the SEC Form 10-K and the DEF-14A Proxy statement. Direct competitors are identified in the “Comparator Group” section of the DEF-14A Proxy Statement. ) These SEC filings also contain information relative to external and industry analysis that will be helpful in your assessment of the Company’s strategy and competitive position.

A thorough analysis requires evaluation of various external stakeholders: •Competitors

•Industry

•Vendors

•Customers

•Governmental entities

•Communities

Internal stakeholders that should be considered in the analysis include: •Shareholders

•Board of Directors

•Management

•Employees

A comprehensive SWOT analysis should be performed relative to the Company’s ability to improve its competitive advantage.

The comprehensive analysis should include both qualitative and quantitative elements, leveraging information available in SEC Filings, business databases, and peer-reviewed articles.

Demonstrate the ability to:

•Apply critical thinking skills to analyze business situations.

•Apply principles of quantitative and qualitative research to business cases. •Describe the opportunities provided by technology for businesses. •Appropriately use effective communication techniques.

•Apply the standard of APA style to all research and writing tasks.

Prepare a report presenting the findings of the comprehensive analysis examining the Company’s corporate strategy and its ability to increase competitive advantage.

The written report will have a body length of 12-15 pages excluding title, abstract, references and appendices. Quotation limits should be Not more than 10% of the body of the paper can be quotations, all of which must be properly attributed in APA format.

Packaging Design Briefs are initiated by the marketing group and forwarded to the Package Engineering group

Instructions: Assume you are the packaging engineer for a large consumer products company. In this company, the Packaging Design Briefs are initiated by the marketing group and forwarded to the Package Engineering group. You currently are working on three packaging design briefs. Copies of these design briefs are attached. Note that the marketing department has completed some information on each brief and the Package Engineering department will complete the remaining information.

  1. Choose one brief and complete the information on the brief. Using what you have learned in the class, complete the information needed on the design brief. Please include justification of your responses when requested. You are making judgment calls based on the information that you have been given and also based on what we have learned in the class.

  2. Complete a Power Point Presentation. The Power Point presentation should reflect the outcome of completing the design brief as well as other aspects you deem necessary in presenting, you need to have at least 10 slides, to include an introduction slide and a reference.

  3. Complete a video for your presentation using Kaltura (additional instructions are attached and provided in the Announcements).

Once completed, upload the brief, presentation, and video for grading. Your responses will be graded based on your demonstration of the concepts studied in the class. Again, select only ONE brief to complete the final project.

Brief 1

Packaging Design Brief

Product: Juice

Product Information: To be completed by Marketing and forwarded to Package Engineering.

Product description: The product is a high-end beverage juice product. The product is non-alcoholic and contains several different fruit juices.

Production of product: The product will be produced in California and shipped by truck to 20 different distribution centers in the United States and then will be distributed to stores in cases of 24.

In-store sales method: The product will be displayed on the store shelf with other high-end juice products.

Price Point of product: The product will have a high price point within the range of juice products.

Specific requirements of package in the store: The package must show the brand name and legal and nutritional information.

Package Information – To be completed by Package Engineering

(Please fill in your responses on this form and submit the form. APA formatting is not required)

Primary Package

(The package that comes in direct contact with the product, the retail package)

Describe the function(s) that must be served by the primary package for this product (include all that apply).

What is your recommendation for the material(s) that should be used for the primary package?

Please justify your material(s) selection. Include the advantages of this material for this purpose and the disadvantages or concerns of using this material.

What method of printing do you recommend for the primary package?

Please justify your recommendation of print method. Include the advantages of this print method for this package and the disadvantages or concerns of using this print method.

Have you made any assumptions in choosing the material or print method?

What environmental concerns must be addressed for the primary packaging?

Secondary Package

(The packaging used to ship the product from manufacturing location through distribution and to the retail store)

Describe the function(s) that must be served by the secondary package for this product (include all that apply).

What is your recommendation for the material(s) that should be used for the secondary package?

Please justify your material(s) selection. Include the advantages of this material for this purpose and the disadvantages or concerns of using this material.

What method of printing do you recommend for the secondary package?

Please justify your recommendation of print method. Include the advantages of this print method for this package and the disadvantages or concerns of using this print method.

Have you made any assumptions in choosing the material or print method?

What environmental concerns must be addressed for the secondary packaging?

discuss the planning steps, possible recovery options, and recommended testing requirements needed to support a successful business contingency/continuity of operations environment.

Instructions: In approximately 10-12 double-spaced pages discuss the planning steps, possible recovery options, and recommended testing requirements needed to support a successful business contingency/continuity of operations environment. Finally, the paper should include your recommendation for a proposed 24-month cycle business contingency testing plan — what should be tested and how the test should be conducted. Perhaps ranking possible critical corporate assets with the type of testing (i.e., plan reviews, table-top exercises, or perhaps up to and including full blown backup and recovery tests) You should take into consideration costs associated with the recommended testing process — not only personnel and equipment but also production costs.
Prepare your paper in Word. Include a minimum of 5 sources. The citations and the reference list in the paper should be formatted in accordance with APA 6th edition guidelines. Note: Also include a cover page, a one-paragraph abstract, a table of contents and any appendix (if necessary), which do not count toward the regular length of the paper.
After it meets all of the stated criteria in the posting, attach the paper AND (if required) the originality report for IA2 in your Assignments/Dropbox in LEO. Instructors will be submitting all papers through Turnitin, a tool that checks for plagiarism—so be sure that all writing is original and all sources are referenced according to the APA guidelines.


Grading Criteria
This assignment is worth 10 percent of your total grade.

Criteria

Excellent A (90+)

Satisfactory B (80-89)

Needs Improvement (below 80)

Content (80%)

Clarity ofplanning steps

The contingency planning steps addressed are thoroughly developed and clearly stated.

The contingency planning steps addressed are adequately developed and clearly stated.

One or more of the contingency planning steps addressed are neither adequately developed or clearly stated.

Clarity ofpossible recovery options

The possible contingency recovery options presented are thorough and complete.

The possible contingency recovery options presented are complete.

The possible contingency recovery options presented are incomplete.

Clarity of recommended testing requirements including proposed 24-month cycle business contingency testing plan

The recommended testing requirements including proposed 24-month cycle business contingency testing plan is thoroughly developed and logically presented.

The recommended testing requirements including proposed 24-month cycle business contingency testing plan is sufficiently developed and logically presented.

The recommended testing requirements including proposed 24-month cycle business contingency testing plan is not sufficiently developed and/or not logically presented.

Quality of documented support

The discussion in the paper is based on a thorough review of the literature.

The discussion in the paper is based on an adequate review of the literature.

The literature review presented in the paper is inadequate.

Form (20%)

Organization

The content is well organized with clear transitions among major subtopics.

The content is generally well organized with some improvement possible in transitioning among subtopics.

The organization of the content is confusing without clear transitions among subtopics.

Writing style

Graduate level writing is reflected throughout the paper, including accurate spelling, punctuation, grammar, and sentence structure.

Writing is acceptable, a few errors in spelling, punctuation, grammar, and/or sentence structure.

Writing does not meet graduate standards. Unacceptable number of errors in spelling, punctuation, grammar, sentence structure, and/or citation format.

Use of proper APA formatting

In-text citations are presented in proper APA format and all sources are identified in the reference list and cited in proper APA format.

Minor errors in citation identification and/or APA format.

Unacceptable number of errors in citation identification and/or APA format.

Events and Causal Factors Chart Project

Events and Causal Factors Chart Project

Read the U.S. Chemical Safety Board (CSB) investigation report of the 2007 propane explosion at the Little General Store

in Ghent, WV. The final report can be read/downloaded at the following link:

http://www.csb.gov/assets/1/19/CSBFinalReportLittleGeneral.pdf

Additional information on the incident, including a video summary, can be found at the following link:

http://www.csb.gov/little-general-store-propane-explosion/

Complete the assignment as detailed below.

Part I: From the information in the report, create a chart listing events and causal factors for the incident in Microsoft

Word, Open Office, or a similar word processing software. If you choose to use a program other than Microsoft Word, be

sure to save and submit the document as a Microsoft Word document (i.e., .doc, .docx). The objective of this project is to

provide you with an opportunity to use this important and very practical analytical tool. The chart does not have to be

infinitely detailed, but the key sequence of events should be charted as should the key conditions surrounding the events.

Keep in mind that the purpose of an events and causal factors chart is to aid in identifying which conditions could be

causal factors.

Use the charting procedures on pages 72–76 of your textbook to help you with this assignment. In addition, refer to the

example events and causal factors (ECF) chart in the Unit IV Lesson for an example of this type of chart.

Part II: On a separate page, discuss the potential causal factors that are revealed in the analysis. How do these causal

factors compare to the causal factors found in the CSB’s investigation report? Do you think more analysis is needed? This

part of the assignment should be a minimum of one page in length.

Upload Parts I and II as a single document. For Part II of the assignment, you should use academic sources to support

your thoughts. Any outside sources used, including the sources mentioned in the assignment, must be cited using APA

format and must be included on a references page.

Useful hints: In Microsoft Word, you can use parentheses for events (events), square brackets for conditions [conditions],

and brackets for the accident {accident}; you may also use a similar convention, such as color-coded text or the shapes

that are available within Microsoft Word. Whatever convention you use, be sure you provide some kind of key.

Journal Entry: Bonds and Stocks

INTERMEDIATE ACCOUNTING II

Module 1: Critical Thinking

Important! Read First

Choose one of the following two assignments to complete this week. Do not do both assignments. Identify your assignment choice in the title of your submission. When you are ready to submit, click the Module 1 Critical Thinking header on the Assignments page to upload the document.

Assignment Option #1: Journal Entry: Bonds and Stocks

Bonds:Intel Inc. is the pioneer in the manufacture of microprocessors for computers. The company’s fiscal year runs from April 1 to March 31. On 4/1/2015, Intel Issued $5,000,000 of 11% Bonds due in 10 years. The interest is payable annually on April 1. The market rate of interest on that date for bonds of similar risk is 10%.

Prepare the journal entry for the issuance of the bonds and on the first interest payment date.

Use the Excel Template linked at the bottom of this page to prepare an amortization schedule for the bonds. Any written comments should be included in Excel’s comments function and formatted according to CSU-Global Guide to Writing and APA Requirements.

Stocks; presented below is the stockholders’ equity section of AMR Corporation. All amounts are in millions except for number of shares and par value.

Stockholders’ Equity (Deficit)

Current

Year

Prior

Year

Preferred stock – 20,000,000 shares authorized; none issued

$ -0-

$ -0-

Common stock – $1 par value; 750,000,000 shares authorized; 182,350,259 shares issued

182

182

Additional paid-in capital

2521

2605

Treasury shares at cost: current year-21,194,312; prior year-22,768,027

(1,308)

(1,405)

Accumulated other comprehensive loss

(664)

(785)

Accumulated deficit

(1,312)

(551)

$(581)

$46

  1. Explain why the common stock is classified as part of the stockholders’ equity.

  2. Explain why treasury stock is not classified as an asset.

  3. Explain what is meant by “Accumulated other comprehensive loss.”

  4. Why is the accumulated deficit larger in the current year than in the prior year?

  5. Compute book value per share for AMR for the current year

Assignment Option #2: Essay: Bonds and Stocks

  1. J. J. Walter is the Chief Executive Officer of JJW Industries. He and other executives are contemplating whether or not to issue long- term debt to finance plant expansion and renovation. In the past, his company has issued traditional debt instruments that require regular interest payments and a retirement of the principal on the maturity date. However, he has noticed that several competitors have recently issued bonds that either do not require interest payments or defer interest payments for several years. He has asked you, the company’s controller, to prepare a two-page memo addressing the following questions.

  2. Why would a company issue bonds that require interest payments if bonds that do not require interest payments are being sold in the open market?

2.If the company were to issue 10-year bonds with a face value of $ 100,000 and the market rate of interest is 10%, what would be the proceeds from the sale if the bonds were zero- interest bonds? What would be the proceeds if the annual interest payments did not begin for five years and the stated rate of interest were 10%? What would be the proceeds if the bonds paid interest annually for 10 years at 10%?

3.What factors must a business consider when determining the interest terms associated with long- term debt?

  1. Damijo Company has been very successful in recent years. Cash flow from operations is more than sufficient to cover the cost of all capital expenditures as well as regular cash dividends. To utilize some of the extra cash, Damijo decided to begin a program of repurchasing its shares in the open market. The shares will not be retired but will be held for potential reissue. Because Damijo has never repurchased its shares before, it has not had to make a choice between the par value and cost methods of accounting for treasury stock.

As the chief accounting officer in the company, you have been asked to draft a memo to the board of directors recommending either the cost method or the par value method of accounting for treasury stock. Your memo should address issues such as the prevailing practice, the likely effect on the financial statements (particularly the Equity section), and the potential impact of the treasury stock accounting treatment on the ability to maintain steady cash dividend payments in the future.

Your well-written paper must be 2-3 pages, in addition to title and reference pages. The paper should be formatted according to the CSU-Global Guide to Writing and APA Requirements. Any supporting calculations should be inserted in a table in your Word document. Do not submit two separate documents, as only one

Determine the HRM’s role in the performance management process and explain how to ensure the process aligns with the organization’s strategic plan

Overview: This milestone focuses on the topics of this week’s lessons: managing and appraising employee performance.

Using the material on performance management and appraisals provided in this week’s lesson and the case, in a short paper you should:

 Determine the HRM’s role in the performance management process and explain how to ensure the process aligns with the organization’s strategic plan.  Differentiate between the trait, behavioral, and results-based performance appraisal systems, providing an example where each would be most applicable.  Identify best suited appraisal for the Maersk Customer Service – CARE Business Partner.  Identify and describe a variety of performance rating scales that can be used in organizations including graphical scales, letter scales, and numeric scales.

Guidelines for Submission: Your submission should be 2–3 pages in length and double-spaced using 12-point Times New Roman font. Be sure to list your references at the end of your paper.

Instructor Feedback: This activity uses an integrated rubric in Blackboard. Students can view instructor feedback in the Grade Center. For more information,

Business & Finance:Problem Identification

Problem Identification

Field: Business & Finance

For this assignment, the Learning Team conducts research related to a business problem. This allows students to use critical thinking in their research to identify problems and discuss how to develop potential solutions. This will build a foundation for the rest of the Learning Team’s assignments. Keep in mind you must validate your problem to insure its the root problem vs. a symptom.

.

Assignment Steps

Select a business situation such as reorganization, office closure, expansion, etc.

Locate 2 to 3 articles from the University Library about the subject.

Prepare a 800-word discussion of the business situation. The discussion should include the following:

Summarize the issue

Identify the problem

Explain why this is the underlying problem

Relate the research to the problem

Explain how a clearly defined problem could help with solutions

Review the 5 steps to critical thinking from your week 1 reading.

Format the assignment consistent with APA guidelines.

Annotated Bibliography: Sustainability and Community participation

Annotated Bibliography

As part of your Doctoral Seminar for this set of weeks, you are participating in a seminar-style discussion about the weekly topics. You must address 5 of the attached Dissertations in the prescribed format. As a related exercise, submit an annotated bibliography of the 5 resources you referred to this week. For each dissertation entry, be sure to include the full APA citation and address the following :

  1. Scope

  2. Purpose

  3. Philosophical Approach

  4. Underlying Assumptions

  5. Research

  6. Limitations

  7. Opportunities for further inquiry

  8. Validity of use

Dissertation Resources:

General Topic: Sustainability and Community participation

Khaleghi Kerahroodi, M. (2016). Meaningful community engagement in public-private partnerships: A case study of Manhattan’s downtown redevelopment project (Order No. 10127300). Available from ProQuest Dissertations & Theses Global: The Arts. (1809116542). Retrieved from https://search-proquest-com.ezp.waldenulibrary.org/docview/1809116542?accountid=14872

Cohen, M. C. (2015). Aligning public participation processes in urban development projects to the local context (Order No. 3700187). Available from ProQuest Dissertations & Theses Global. (1679461774). Retrieved from http://ezp.waldenulibrary.org/login?url=https://search-proquest-com.ezp.waldenulibrary.org/docview/1679461774?accountid=14872

House, J. A. (2013). Exploring deliberation and participation: Tribal membership meetings under Indian reorganization act constitutions (Order No. 3551623). Available from ProQuest Dissertations & Theses Global. (1288855307). Retrieved from http://ezp.waldenulibrary.org/login?url=https://search-proquest-com.ezp.waldenulibrary.org/docview/1288855307?accountid=14872

Barclay, N. (2016). The role of community participation for green stormwater infrastructure development (Order No. 10152046). Available from ProQuest Dissertations & Theses Global. (1835116804). Retrieved from http://ezp.waldenulibrary.org/login?url=https://search-proquest-com.ezp.waldenulibrary.org/docview/1835116804?accountid=14872

Elisha, I. M. (2016). African American young people’s views of youth participation and its implications for addressing community problems (Order No. 10007618). Available from ProQuest Dissertations & Theses Global. (1762748425). Retrieved from http://ezp.waldenulibrary.org/login?url=https://search-proquest-com.ezp.waldenulibrary.org/docview/1762748425?accountid=14872